Linnmon Corner Desk – Almost every home today is in need of a desk. Many times there is just no room for any other furniture. The corner desk table is well suited for these situations. All available corners can be easily used for a desk or converted to a small office. It can be hard to buy the perfect hard drive, but it’s really easy to do one. Making a desktop drive allows for customization and styling
Determine the size of the Linnmon Corner Desk needed. This determines the width of the door required. The door can be 24, 36 or even 48 inches wide. It can be a hollow or solid door. With tape measure, print on the length that is the same as the width of the door. If the door is 24 inches wide, measure 24 inches in length. With a ruler, draw a line from the selected measurement to the opposite end at the bottom of the door. This is done to create a perfect triangle.
Use the saw, cut along the line you have done. This is one of the edges that will go against the wall. Mark 2 of 4-inch wood pieces the same measurements as the width of the door. Cut with the saw. Mark an additional 2 of 4-inch wood pieces the same length minus 1 “and cut this piece with the saw. Linnmon Corner Desk will hold your corner drive. Locate the rules and brand. Place the timber on the side of the 2 by 4 inch wood pieces that will go against the wall. Put in place and screw two2 of 4-inch pieces of wood to the selected rules on the wall. Put the wooden glue on top of these installed wooden pieces.